DuraVent 4” x 6 5⁄8” Square Horizontal Termination Cap

Need a custom build chimney pipes setup that fits just right? We can custom-build your chimney pipe setup and help you plan and complete the entire build with confidence. If you have any questions, please contact us 541.678.0243

DuraVent 46DVA-HC DirectVent Pro Square Horizontal Termination Cap (aluminum)

DuraVent 46DVA-HC 4” x 6 5⁄8” DirectVent Pro Square Horizontal Termination Cap is used for standard and high-wind through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors.

This termination cap is made of aluminum.

Features:

Diameter: 6-5/8″ Use for Standard and High-Wind Through-the-Wall Terminations Dimensions: 13-1/2″L x 13-1/2″W x 12-1/2″D

DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer).

DirectVent Pro is a unitized, coaxial venting system designed for use with direct vent gas or propane stoves, heaters, and fireplaces.

For 4” x 6 5⁄8” direct vent.

DuraVent 46DVA-HC-S DirectVent Pro Square Horizontal Termination Cap Stainless Steel

Use for standard and high-wind through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors.

For 4” x 6 5⁄8” direct vent.

DuraVent 46DVA-HC-C 4” x 6 5⁄8” Copper Square Horizontal Termination Cap

Use for standard and high-wind through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors.

For 4” x 6 5⁄8” direct vent.