4" x 6 5/8" DirectVent Pro Masonry Chimney Conversion Kit

46DVA-KMC Masonry Chimney Conversion Kit (includes: Cap Adapter, 18" x 18" Flashing, Round Ceiling Support/Wall Thimble Cover, and Retro Connector)

46DVA-KCT Masonry Chimney Conversion Kit (includes: Cap Adapter, 18" x 18" Flashing)

46DVA-KCA Chimney Conversion Kit A (includes: Cap Adapter, Retro Connector)

The DirectVent Pro Masonry Chimney Conversion Kit converts your existing masonry chimney to route the exhaust gases and intake air through the side of the masonry chimney. This kit is designed for 4" x 6 5/8" direct vent gas stoves and includes a Cap Adapter, Round Ceiling Support/Wall Thimble Cover, Retro Connector and an 18" x 18" Flashing. Termination Cap and 4" Flex sold separately.

DirectVent Pro is a complete venting system designed for use with gas direct vent stoves, heaters, and fireplaces.

Additional Information:

Dura-Vent offers the most complete product line in the industry to meet every installation need. Ranging from traditional through-the-roof installations to fireplace inserts and wood stove conversions, Direct-Vent Pro offers cutting edge technology component parts to make every element a key part in the efficiency, style and safety of your installation. Adding to an already impressive list of possibilities, easy to install side-wall installations present exciting new design options. Experience redesigned excellence with tighter inner connections that secure without the use of gaskets or sealants (unless specified by the appliance manufacturer) and innovative, low profile designs that result in beautiful products that look elegant in any interior.

DirectVent Pro is a complete direct vent system line re-born from Simpson DirectVent GS. All DirectVent Pro components are compatible with DirectVent GS stock, except for the DirectVent Pro Pipe Extensions. 

Specifications:

• Fits 4'' x 6/58'' DirectVent
• Construction Materials: .020" aluminum inner wall with .018" galavinized steel outer wall
• Clearances: Specified by the appliance manufacturer
• Listings: DirectVent Pro, in combination with the gas appliance, has been tested and listed as a decorative gas appliance system or as a direct vent heater system by a major agency, such as UL, CSA, Warnock Hersay, or OMNI
• Converts your existing masonry chimney and route the exhaust gases and intake air through the side of the masonry chimney
• Designed for 4" x 6 5/8" direct vent gas stoves and includes a Cap Adapter, Round Ceiling Support/Wall Thimble Cover, Retro Connector and an 18" x 18" Flashing
• Fully unitized twist lock connection
• Use of sealants at the joint connections of the inner and outer pipe are optional, unless specified by the appliance manufacturer
• Features exterior laser-welded seams
• Wind, rain, and thermal performance tested for safe, dependable operation

The DirectVent Pro Masonry Chimney Conversion Kit converts your existing masonry chimney and route the exhaust gases and intake air through the side of the masonry chimney. This kit is designed for 4" x 6 5/8" direct vent gas stoves and includes a Cap Adapter, Round Ceiling Support/Wall Thimble Cover, Retro Connector and an 18" x 18" Flashing. Termination Cap and 4" Flex sold separately. DirectVent Pro is a complete...Manufacturer's Limited Lifetime Warranty